I had my solar panel set up for a couple months now and just started to monitor the power output. Right now I have a 90 watt harbor freight kit, and 2 80 watt mono and 2 80 watt poly panels. All are wired in parallel so it should add to about 410 watts at around 20 volts right? I know voltage drop for battery bank after charge controller. So it converts it down to 13 volts. I have an amp meter wired in series before the charge controller and at peek time I only see it reach 14 amp. 14 x 13 volts is 182 watts I am only getting out of the panels. So I cam losing almost 60% of my potential power output from the panels!!!! Why is that? I thought that the amps do not change only the voltage drop for the batteries, so my meter should read almost 20 amps. Which would be 20 x 13 volts = 260 watts output from panels. That is only around 40% of power loss. I am so confused and not happy with the results I am reading here with the amount of money I spent for all of this. Thanks for every ones time and help.
Recent Comments